0
Caleffi 548062A - 2-1/2" Flanged Hydro Separator
Regular price
$2,999.00 USD
Regular price
Sale price
$2,999.00 USD
Unit price
per
Shipping calculated at checkout.
Application
The hydraulic separator creates a zone with a low pressure loss, which enables the primary and secondary circuits connected to it to be hydraulically independent of each other; the flow in one circuit does not create a flow in the other.
Typical Specification
Furnish and install on the plans and described herein, a Caleffi HydroSeparator as manufactured by Caleffi. Each separator must be designed with an epoxy resin painted steel body, a brass blowdown drain valve and automatic brass air vent with brass shutoff valve. The separator design must include ANSI B16.5 Class 150 RF flanges. Each separator shall be Caleffi model 548 or approved equal. (See product instructions for specific installation information.)
Maximum Temperature: 250°F without insulation and 210°F with insulation shell.
The hydraulic separator creates a zone with a low pressure loss, which enables the primary and secondary circuits connected to it to be hydraulically independent of each other; the flow in one circuit does not create a flow in the other.
Typical Specification
Furnish and install on the plans and described herein, a Caleffi HydroSeparator as manufactured by Caleffi. Each separator must be designed with an epoxy resin painted steel body, a brass blowdown drain valve and automatic brass air vent with brass shutoff valve. The separator design must include ANSI B16.5 Class 150 RF flanges. Each separator shall be Caleffi model 548 or approved equal. (See product instructions for specific installation information.)
Maximum Temperature: 250°F without insulation and 210°F with insulation shell.
Specs
–
| Product Type: |
Hydraulic Separator |
|---|---|
| Connection Type: |
Flanged x Flanged |
| Connection Method: |
Flanged |
| Size: |
2-1/2" |
| Max Pressure (PSI): |
150 |
| Material: |
Steel Brass |
Recently Viewed